¡@

Vertical Plastic Injection Molding Machines

With Rotary Table
Main Standard :
MODEL YH-25VR YH-35VR YH-45VR YH-55VR YH-70VR YH-85VR ¡@

YH-100VR

¡@

 YH-150VR
INJECTION UNIT
Screw Diameter mm 22/26 26/32 28/36 30/38 32/40 36/42 40/46 46/52
Injection Pressure kgf/cm2 2089/1496    2071/1367 2321/1404 2057/1282 2180/1395 2176/1599   2104/1591      1667/1304 
Injection Capacity cm3 36/50 64/96 80/132 92/147 113/176 158/215 214/282 316/403
Injection Weight(P.S) gram 32/45 57/87 72/119 83/133 101/158 141/194 192/254 284/363
Injection Rate cc/s 33/46 44/67 47/78 55/89 60/94 61/83 78/103 109/139
Screw Speed r.p.m 0 ~ 150 0~180 0~180 0~180 0~180 0~180 0~180 0~150
Screw Stroke mm 90 120 130 130 140 155 170 190
Nozzle stroke mm 150 150 200 200 200 200 200 200
Nozzle Force tf 2.4 2.4 3.5 3.5 3.5 3.5 3.5 3.5
CLAMPING UNIT
Clamping Force tf 25 35 45 55 70 85 100 150
Clamping Stroke mm 215 215 215 200 200 200 250 250
Max. Mould Space mm 360 360 395 380 380 380 500 550
Min. Mould Height mm 145 145 180 180 180 180 250 300
Hydraulic Ejector Force tf 1.7 1.7 1.7 1.7 1.7 2.7 2.7 2.7
Ejector Stroke mm 35 35 35 35 35 35 50 60
ROTARY TABLE SYSTEM
Number of Molds sets 2 or 4 2 or 4 2 or 4 2 or 4 2 or 4 2 or 4
ELECTRICAL EQUIPMENT & GENERAL
Drive Motor kw 3.7(5HP)  5.5(7.5HP) 7.5(10HP) 7.5(10HP) 11.1(15HP) 11.1(15HP) 14.9(20HP) 18.6(25HP)
Heater kw 3 4.1 4.9 4.9 5.6 6.7 8.5 10
Max. Hydraulic Pressure kgf/cm2 140 ¡@ ¡@
Oil Tank Capacity l 160 230 230 230 260 260 340 400
Dimension of Machine(LxWxH) m 2.1 x 1.5 x 3.0 2.3x1.6x3.1 2.0x1.75x3.2 2.5x1.7x3.3 2.6x1.9x3.5 2.6x1.9x3.7 2.9x2.0x4.1 2.9x2.2x4.3
Weight of Machine ton 2 2.8 3.5 4 5 5.8 7.1 8.5
Figures shown herein are subject to change without notice.

Screw and clamping force can be design as customer's request.